How A Filter Pump Makes Your Pool Healthy

According to swimming pool pump manufacturers say. A swimming pool without a filter will soon turn into a dirty mess. Without a filter pump, the bacteria and dirt will remain in the swimming pool. This will then quickly make your pool a breeding ground for diseases instead of a healthy wellness environment. That’s something you definitely have to avoid!

1.Why do you need a filter pump for a swimming pool?

To remove dirt and insects from the pool and for better distribution of chemicals to combat bacteria

The filter pump is therefore the most important part of your swimming pool installation.

 

2.When should you filter the swimming pool?

If you use the pool a lot, it is important that it is filtered adequately. The amount of filtering time depends on the filter that has been installed. Choose your filter installation based on the capacity of the equipment and the volume of your swimming pool and ensure that the pool water passes through the filter completely every 4 hours.

To determine the capacity of your filter, take a look at the flow rate that can be handled by the filter and the filter pump. Ideally, these will be identical, but make sure that they are at least close to each other in terms of capacity.

how-a-filter-pump-makes-your-pool-healthy.jpg

3.How can you filter a swimming pool?

There are various possibilities for filtering a swimming pool. It is important to choose a filter system that is suitable for your pool. For example, you don’t need a filter installation that shifts 20 m³/h for a small plunge pool. The same applies to a cartridge filter for a swimming pool holding more than 40 m³of water.

 

4.How does a swimming pool filter installation work?

As the swimming pool pump manufacturers say. A sand filter won't work if you do not have a swimming pool pump; you need both system components to make sure your pool water becomes crystal clear again.

The swimming pool pump pumps the water from the pool to the swimming pool filter. The surface water goes to the sand filter via skimmer or overflow. The pump also brings the water to the sand filter via the pool vacuum cleaner.

If you have a skimmer pool, then the skimmer system will most likely have a pre-filter or filter basket. This can intercept the larger debris first. Once the water gets to the pool sand filter, it is pumped through the sand filter from top to bottom. This filter is filled with a filtration medium, such as sand or glass.

 

660

shares

contact us

contact-email
JAZZI

JAZZI Pool & Spa Products Co., Ltd.

We provide customers with quality products and services

看不清,请点击我!

If you would like to leave us a comment please go to contact us

contact-clo
top